Bamboo Marine Plywood

Send Inquiry
Bamboo Marine Plywood
Details
Thickness:9 / 12 / 15 / 18 / 20 / 25 mm (other targets by order)
Structure/Grain:Horizontal / Vertical / Crossed multilayer
Colors:Natural, Carbonized, Zebra (strand contrast)
Density:650–750 kg/m³
Moisture Content:8–12%
Adhesive:E0/E1 melamine; WBP phenolic for higher humidity
Category
Bamboo Plywood
Share to
Description

Product Statement

Bamboo marine plywood is our exterior-duty bamboo panel engineered for salt-air, splash, and frequent wash-down environments. It uses WBP (phenolic) bonding and balanced lay-ups to withstand moisture cycling far better than interior panels. Typical placements include boat interiors and joinery, cockpit furniture, locker fronts, galley cabinetry, head linings, coastal retail fixtures and outdoor kiosks.

Exterior bond using WBP phenolic resin designed for severe moisture exposure.

Balanced lay-up reduces panel movement after coating and during seasonal humidity swings.

Edge-exposure tolerance improves markedly when you fully seal end-grain and back-prime hidden faces.

Compliance files (on request): EN 314-2 Class 3 glue-bond testing; EN 717-1 E0/E1 emissions for interior variants; FSC® Chain-of-Custody for verified sourcing

Detailed Specs

Calibrated thickness 9 / 12 / 15 / 18 / 20 / 25 mm (other targets by order)
Grain options Vertical • Horizontal • Strand-face on request
Colorways Natural • Carbonized (caramel)
Adhesive WBP phenolic (exterior) • E0/E1 (interior, non-marine)
Density ~650–760 kg/m³ (lay-up dependent)
Moisture at pack 8–10%
Tolerances L/W ±0.5 mm • T ±0.25–0.30 mm • Squareness ≤2 mm/m
Documents EN 314-2 Class 3 (on request), EN 717-1 E0/E1, CE/SGS; FSC® CoC available

oem bamboo plywood


Why it outperforms generic panels

Engrave-tone options: Natural yields a warm amber engraving; Carbonized (caramel) produces darker contrast without heavy power.

Cleaner edges: Fine-sanded faces and fiber orientation minimize fuzz. Optional low-tack masking film cuts scorch marks and reduces sanding

 

born from bamboo


Construction Choices

Faces / grain: Vertical (fine, linear), Horizontal (bold stripe); strand-face available for extra abrasion.

Core architecture: cross-oriented 3-ply (H/V/H or V/H/V) for flatness; thicker multi-ply on request.

Adhesive systems: WBP phenolic for marine/outdoor; E0/E1 low-VOC is available for dry interior millwork (not marine-rated).

Colors: Natural or Carbonized (caramel) through-color; chocolate/zebra by order.

Factory surface: calibrated and fine-sanded (~200–240 grit), ready for epoxy primer, marine PU, clear UV, or oil-wax depending on placement.

Bamboo Plywood
China Bamboo Plywood

Finishing Recipes

Masking: Apply low-tack film before engraving to reduce soot; peel and do a light 320–400 grit pass if needed.

Clear coats: Matte UV is the fastest; oil-wax gives a hand-rubbed feel-apply very thin coats (bamboo is dense).

Painted parts: Order primer-UV on both faces to keep coating stress balanced.

Edge care: For hand-held parts, a small R2–R3 round-over removes sharpness without hiding the

Bamboo Panel Production Flow

Where It Fits Best

Boat interiors: bulkhead skins, bunks, lockers, galley and head cabinetry, companionway steps (with anti-slip finish).

Tops & fit-out: cockpit tables, chart desks, drawer boxes; coastal café counters (with WBP + full sealing).

Coastal architecture: marina kiosks, lifeguard stations, seaside retail fixtures, signage backers.

For continuously immersed or load-bearing primary structures, use composite lay-ups (e.g., glass/epoxy over bamboo core) or certified marine substrates.

Bamboo Plywood Application

Quality, safety & sustainability

Batch-matched color sorting for consistent cabin sets.

Traceable kiln curves, press schedules, and calibration files.

Fast-growing Moso bamboo reduces pressure on slow-growth hardwoods; FSC® supply available

 

Packaging & Delivery

Panels are kraft-interleaved, PE-wrapped, corner-guarded and PET-strapped to ISPM-15 pallets. Mixed consolidation (thickness/grain/finish) is supported with a pallet map for fast receiving. MOQ typically 100 sheets/spec. Raw panels: 10–16 working days; finishing (UV/primer) adds ~3–5 days. Cut-to-size, groove/drill, labeling and kit packing are available.

 


FAQ – Bamboo Marine Plywood

1) Is this the same as "BS 1088 marine plywood"?
Not by default. Our panels use WBP phenolic and balanced lay-ups for marine use; third-party BS 1088/EN testing can be arranged on request. For structural hull applications, follow your naval architect's spec.

2) Can I use it for countertops in a galley?
Yes-specify WBP, fully seal all edges and cut-outs, and use a durable topcoat. For long spans, add a stiffened edge or sub-top.

3) Will the caramel (carbonized) color help hide wear?
Carbonized tones mask scuffs better and give warmer interiors. For maximum abrasion resistance, select strand-face or a harder topcoat.

4) How do I prevent delamination at edges?
The glue line is exterior-rated, but unsealed end-grain is vulnerable. Saturate edges with epoxy sealer and maintain coatings over time.

5) What fasteners should I use onboard?
A2/A4 stainless fasteners with proper bedding (butyl or marine polysulfide). Pre-drill and lightly countersink to avoid veneer lift.

Hot Tags: bamboo marine plywood, China bamboo marine plywood manufacturers, carbonized bamboo plywood, Cross Laminated Bamboo Plywood, Bamboo Marine Plywood, 1 4 Inch Bamboo Plywood, Staining Bamboo Plywood, Chocolate Bamboo Plywood

Send Inquiry